Lamb Overdrive

Meet your new 'do-everything' overdrive. The Lamb covers a lot of ground sound-wise and is a very utilitarian overdrive. It goes from clear, amp-like uncompressed sounds - keeping your natural tone in tact, to 2nd or 3rd stage overdrive sounds, getting very close to distortion. The Mid Boost pushes your mids to help you cut through the mix with Klon-esque character. You'll love pairing the Lamb with the Lion Distortion for the ultimate drive section.

100% All Analog Signal Path

Full MIDI Control over every knob, switch, and feature

3 Selectable Overdrive Circuits: 

  • Cyan - Quad silicone diodes
  • White - Dual silicone diodes
  • Yellow - Asymmetrical silicone diodes

3 Selectable Onboard Presets

  • Knobs are inactive in preset mode

100 Onboard Presets with a MIDI controller

  • Any circuit can be saved to any preset location

Live Mode & Preset Mode

  • Live Mode: Knobs always active
  • Preset Mode: Knobs inactive

Quick access between Live Mode & Presets

Multi-Colored LEDs

  • Indicate the status of each preset & overdrive circuit

Double Tap Preset Switch for Instant Lead Boost

Soft Click Bypass Switches

Internal 18V Charge Pump

Converts a standard 9V power supply to 18V
Provides maximum headroom and responsive touch dynamics

Power Requirements:

9V DC (Negative Tip) power supply (not included)
Requires 200mA or larger power supply (lower power may cause performance issues)

Dimensions:

4.7 in x 3.7 in x 1.66 in (119 mm x 94 mm x 42 mm)

Op-Amp Based Overdrive Circuit with soft clipping diodes inside the feedback loop

Tone inspired by classic circuits like:

Marshall BluesBreaker
Analog Man King of Tone
JHS Morning Glory

High Headroom & Dynamic Response due to internal 18V conversion

Three Selectable Overdrive Circuits:

Custom-voiced drive tones with versatile gain ranges

Lead Boost Mode for instant gain increase with a double tap

$279.99
/

Word on the street

Explore the Controls

Lamb Overdrive

Volume Knob

Used to set the overall output volume of the Lamb. 

Gain Knob

Used to set the amount of gain/breakup of the Lamb.

Tone Knob

Used to add or remove high frequencies from the Lamb. Counterclockwise removes highs and clockwise adds highs to your signal path.

Mid Boost Knob

Used to add the all important mid frequencies to the Lamb. The specific frequency has been fine tuned and is set to help your guitar cut thru the mix. Think of this knob as a volume knob for your mids, fully counterclockwise your tone is unaltered, as your turn it clockwise it will add more and more mids to your signal path.

Preset Switch

Tap the Preset switch to activate Preset Mode. Press and hold the Preset switch for ½ second to cycle through presets, returning to the first after the last. Double-press the Preset switch to activate the Lead Boost

Bypass Switch

Tap the Bypass switch to engage/disengage the Lamb. Hold the Bypass switch for ½ second to cycle through circuits, starting over after the last one.

Sound Samples

Get these tones

User Manual

Explore the Lamb Overdrive User Manual

Explore Now
stack and save

shop jet sets

Shop our most powerful combos and take your tone to the next level.
shop sets

our purpose

JET Pedals combine innovation and simplicity, delivering rich tone, intuitive control, and seamless playability to inspire guitarists in worship and beyond.

learn more about our purpose