JET Stream 100W Power Amp

The JET Stream is a true 100-watt stereo power amp built for modern guitarists who use amp modelers and demand real stage volume without sacrificing tone. Compact, clean, and powerful—it delivers what you put in, nothing more and nothing less.

True 100-Watt Class D Stereo Power Amp

  • Real 100-watt RMS output (not peak or inflated ratings) for accurate power and clarity.

  • Two independent power amps for true stereo operation or dual mono setups.

Flexible Inputs & Outputs

  • Stereo inputs rated for full line-level signals (1V RMS / 0 dB).

  • XLR, TRS, and TS combo jacks—no adaptors required.

  • SpeakON-type output connectors for secure, professional-grade connections.

Transparent, Tone-Pure Design

  • No EQ section—preserves your modeler’s exact sound signature.

  • Ground lift switch eliminates unwanted hums and loops.

  • Balanced inputs allow long, noise-free cable runs from your board.

Pedalboard-Ready Form Factor

  • Lightweight and compact (5.75” x 3.65” x 2.35”).

  • Ideal for fly rigs, gigging boards, and compact setups.

  • 36V 4A power supply included.

Responsive Control

  • Master volume knob lets you go from whisper-quiet bedroom tones to full-stage power—all while maintaining tonal integrity.

Power Supply

  • Operates on a 36V 4A center-positive DC power supply (included).
  • To reduce output power, a 24V 4A center-positive DC supply may be used (not included).

⚠️ Do not exceed 36V—doing so may damage the unit and void the warranty.

Connections

  • Inputs: Balanced XLR or ¼” TRS / Unbalanced ¼” TS
  • Outputs: SpeakON connectors (L/R)
  • Input Signal: Line level (1V RMS / 0 dB)

Dimensions: 5.75” x 3.65” x 2.35”

Weight: Lightweight, pedalboard-friendly design

**SAVE $50 WITH INTRODUCTORY PRICING!**
$429.99 $379.99 Save $50.00
/
True 100-watt RMS stereo output. Zero tone coloration.

Bring Your Modeler to Life.

The JET Stream was built for players who live in the modern world of amp modeling but still crave the feel of moving air on stage. Whether you’re using a Quad Cortex, Kemper, Line 6 Helix, or compact rigs like the UAFX, Tonex One, or Iridium, the JET Stream gives your tones a powerful, transparent voice through a real cab. No coloration, no artificial EQ—just true, amplified tone.

Honestly powerful. 100% JET.

From bedroom to big stage—without compromise.

It’s perfect for gigging musicians, session players, and home producers who need consistent tone at any volume. From whisper-quiet practice sessions to full venue stages, the JET Stream scales effortlessly. Unlike many power amps that exaggerate wattage or compress your sound, the JET Stream delivers a true 100-watt RMS stereo output with crystal clarity. What you craft in your modeler is exactly what you’ll hear on stage.

How to use your jet stream

5 steps to true power

01

Connect your modeler

Use either the XLR, TRS, or TS inputs to connect your modeler or amp modeler to the JET Stream. Both left and right inputs can be used for true stereo operation, or use a single input for mono to dual mono output.

02

Connect Your Speaker Cabinet(s)

Plug your SpeakON outputs into your speaker cabinet(s). The JET Stream supports guitar and bass cabinets and can run multiple cabinets independently.

03

Power It Up

Connect the included 36V 4A power supply to the DC input. Never exceed 36V, as higher voltage can damage the unit.

04

Adjust Master Volume

Start with the Master Volume all the way down before powering on. Then gradually raise it to your desired level—this amp can go from whisper-quiet to auditorium loud while maintaining your tone’s integrity.

05

Enjoy Pure Tone

No need to adjust EQ or coloration. The JET Stream faithfully reproduces the tone of your modeler, so what you hear is what you’ve crafted.

Meet the Jet stream

JET Stream vs. the Competition

How the JET Stream stacks up against other power amps for modelers.

JET Stream

Seymour Duncan PowerStage 170

Power Rating

True 50W RMS per channel (100W Total)

Advertised 170W (31W RMS)

Stereo Operation

True dual power amps

Mono Only

Inputs

Balanced XLR, TRS, TS (no adaptors)

¼” inputs only

EQ Section

None (pure tone transparency)

3-band EQ (coloring tone even when flat)

Line-Level Support

Yes, full line-level input handling

Designed for instrument-level

Price

$379.99*

$399.99

*Introductory Price

FAQs

Many manufacturers quote peak or burst wattage numbers, which don’t reflect real-world output. The JET Stream delivers a true 100-watt RMS, meaning it consistently provides the rated power without distortion or marketing exaggeration.

Yes. The JET Stream accepts line-level signals from any amp modeler, preamp, or effects unit. It works perfectly with Quad Cortex, Kemper, Helix, UAFX, Tonex, ACS1, Iridium, and more.

No. There’s no onboard EQ for a reason—the JET Stream was built to amplify your tone exactly as your modeler creates it. It’s pure, transparent power that lets your tone speak for itself.

Absolutely. The JET Stream’s full-frequency Class D design handles both guitar and bass applications with ease.

Yes. The dual power amps allow you to run multiple cabinets in stereo or multiple cabinets in dual mono configuration.

Loud enough to fill an auditorium or outdoor stage with ease—but still controllable enough to use quietly at home.

The JET Stream is designed to be your personal backline solution—it provides the punch and presence of a traditional amp rig, even without a PA system.

User Manual

Explore the JET Stream User Manual

Explore Now

our purpose

JET Pedals combine innovation and simplicity, delivering rich tone, intuitive control, and seamless playability to inspire guitarists in worship and beyond.

learn more about our purpose